How to assess P20
Use the technical dimensions alongside the product in its printing position. The outer pad dimensions do not define the usable print area. Check the final artwork size, contact direction and free space around the product with a physical sample.
Dimensions and mounting details
| Model Number | P20 |
|---|---|
| Pad Shape | Parabolic Shape |
| Pad Diameter | – |
| Pad Width | 33 mm |
| Pad Length | 58 mm |
| Pad Height | 52 mm |
| Wooden Base Diameter | – |
| Wooden Base Width | 54 mm |
|---|---|
| Wooden Base Length | 74 mm |
| Insert Shape | None |
| Insert Diameter | – |
| Insert Width | – |
| Insert Length | – |
| Insert Depth | – |
Contact with the product surface
For this parabolic shape pad, test where the pad first touches the product and how contact develops across the artwork. Check the fixture position and pad return stroke before comparing print quality.
Compare models with the same shape
The models below are grouped by recorded body dimensions and height. Similar dimensions alone do not confirm an identical printing result on your product.
| Model | Body Dimensions | Height |
|---|---|---|
| P20 | – | 52 mm |
| P181 | – | 55 mm |
| P11 | – | 45 mm |
| P172 | – | 50 mm |
Record the sample print conditions
- P20 and the silicone hardness tested
- Cliché dimensions and final artwork position
- Pad mounting, printing direction and product fixture
- Ink transfer at the centre and edges