Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| PRINTING SPECIFICATIONS | KP06 1C | KP06 2C RR | KP06 1C SLIDING |
|---|---|---|---|
| Number of Colours | 1 Colour | 2 Colour | 1 Colour |
| Cliché Size | 120 × 250 mm | 120 × 250 mm | 100 × 400 mm |
| Closed Ink Cup Diameter | Ø 110 mm | Ø 110 mm | Ø 90 mm |
| Maximum Printing Area | Ø 95 mm | Ø 95 mm | 75 × 225 mm |
| Pad Carrier Cylinder Stroke | 200 mm | 200 mm | 200 mm |
| Printing Cylinder Stroke | 100 mm | 100 mm | 100 mm |
| Two-colour RR Cylinder Stroke | – | 125 mm | – |
| Maximum Printing Pressure | 1180 N | 1180 N | 1180 N |
| Printing Speed / Hour | 1200 pcs | 800 pcs | 750 pcs |
| SUPPLY AND CONTROL | |||
| Control Type | Electropneumatic | Electropneumatic | Electropneumatic |
| Electrical Supply | 220 V | 220 V | 220 V |
| Pneumatic Supply | 6 bar | 6 bar | 6 bar |
| DIMENSIONS AND WEIGHT | |||
| Width × Length × Height | 500 × 900 × 700 mm | 500 × 900 × 1100 mm | 500 × 900 × 1100 mm |
| Weight without Stand | 85 kg | 95 kg | 90 kg |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks