Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| Printing Specifications | KP08 1C | KP08 2C RR | KP08 2C Independent Pad | KP08 4C/5C | KP08 4C/5C Independent Pad | KP08 1C Sliding |
|---|---|---|---|---|---|---|
| Number of Colours | 1 Colour | 2 Colour | 2 Colour | 4/5 Colour | 4/5 Colour | 1 Colour |
| Cliché Size | 150×300 mm | 150×300 mm | 150×300 mm | 100×200 mm | 100×200 mm | 150×550 mm |
| Closed Ink Cup Diameter | ø130 mm | ø130 mm | ø130 mm | ø90 mm | ø90 mm | ø130 mm |
| Maximum Printing Area | ø75 mm | ø115 mm | ø115 mm | ø75 mm | ø75 mm | 115 mm x 300 mm |
| Pad Carrier Cylinder Stroke | 250 mm | 250 mm | 250 mm | 250 mm | 250 mm | 250 mm |
| Printing Cylinder Stroke | 80 mm | 80 mm | 80 mm | 80 mm | 60 mm | 80 mm |
| Two-colour RR Cylinder Stroke | – | 160 mm | 160 mm | – | – | – |
| Maximum Printing Pressure | 1870 N | 1870 N | 1180 N x 2 | 1870 N | 480 N x 4 / 480 N x 5 | 1870 N |
| Printing Speed / Hour | 1200 pcs | 800 pcs | 800 pcs | 1000 pcs | 1000 pcs | 600 pcs |
| Supply and Control | ||||||
| Control | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic |
| Electrical Supply | 220 V | 220 V | 220 V | 220 V | 220 V | 220 V |
| Pneumatic Supply | 6 bar | 6 bar | 6 bar | 6 bar | 6 bar | 6 bar |
| Dimensions | ||||||
| Width | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* |
| Length | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* | 1100 mm* |
| Height | 1730 mm* | 1730 mm* | 1730 mm* | 1730 mm* | 1730 mm* | 1730 mm* |
| Weight with Stand | 265 kg* | 265 kg* | 265 kg* | 300 kg* | 300 kg* | 300 kg* |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks