Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| Printing Specifications | KP09 1C | KV09 1C |
|---|---|---|
| Number of Colours | 1 Colour | 1 Colour |
| Cliché Size | 100×200 mm | 100×200 mm |
| 120×250 mm | 120×250 mm | |
| 150×300 mm | 150×300 mm | |
| Closed Ink Cup Diameter | ø90 mm | ø90 mm |
| ø110 mm | ø110 mm | |
| ø130 mm | ø130 mm | |
| Maximum Printing Area | ø75 mm | ø75 mm |
| ø95 mm | ø95 mm | |
| ø115 mm | ø115 mm | |
| Printing Cylinder Stroke | 160 mm | 160 mm |
| Maximum Printing Pressure | 750 N / 1100 N | – |
| Printing Speed / Hour | 2000 pcs | 3000 pcs |
| Supply and Control | ||
| Control | Electropneumatic | Brushless Motor |
| Electrical Supply | 220 V | 220 V |
| Pneumatic Supply | 6 bar | – |
| Dimensions | ||
| Width | 285 mm | 285 mm |
| Length | 852 mm | 852 mm |
| Height | 711 mm | 711 mm |
| Cleaning Device Width | 216 mm | 216 mm |
| Weight with Stand | 265 kg | 265 kg |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks