Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| PRINTING SPECIFICATIONS | KP16 1C | KP16 4C/5C | KP16 4C/5C INDEPENDENT PAD | KP16 1C SLIDING |
|---|---|---|---|---|
| Number of Colours | 1 Colour | 4/5 Colour | 4/5 Colour | 1 Colour |
| Cliché Size | 180×360 mm | 180×360 mm | 180×360 mm | 180×650 mm |
| Closed Ink Cup Diameter | ø160 mm | ø160 mm | ø160 mm | ø160 mm |
| Maximum Printing Area | ø145 mm | ø145 mm | ø145 mm | 145 mm x 350 mm |
| Pad Carrier Cylinder Stroke | 360 mm | 360 mm | 360 mm | 360 mm |
| Printing Cylinder Stroke | 125 mm | 125 mm | XXX mm | 125 mm |
| Maximum Printing Pressure | 7300 N | 7300 N | 7300 N | 7300 N |
| SUPPLY AND CONTROL | ||||
| Control | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic |
| Electrical Supply | 380 V | 380 V | 380 V | 380 V |
| Pneumatic Supply | 6 bar | 6 bar | 6 bar | 6 bar |
| DIMENSIONS | ||||
| Width | 1800 mm* | 2460 mm* | 2460 mm* | 1800 mm* |
| Length | 1643mm* | 1643mm* | 1643mm* | 1643mm* |
| Height | 2100 mm* | 2100 mm* | 2100 mm* | 2100 mm* |
| Weight with Stand | ± 1200 kg* | ± 1200 kg* | ± 1200 kg* | ± 1200 kg* |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks