Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| Printing Specifications | MR50 | MR100 |
|---|---|---|
| Number of Colours | 1 Colour | 1 Colour |
| Cliché Diameter | ø100 mm | ø100 mm |
| Cliché Height | 50 mm | 100 mm |
| Pad Diameter | ø100 mm | ø200 mm |
| Maximum Printing Diameter | ø100 mm | ø100 mm |
| Maximum Printing Height | 30 mm | 80 mm |
| Printing Speed / Hour – Manual | 1000 pcs | 1000 pcs |
| Printing Speed / Hour – Automatic | 8000 pcs | 8000 pcs |
| Supply and Control | ||
| Control | Electropneumatic | Electropneumatic |
| Electrical Supply | 220 V | 221 V |
| Pneumatic Supply | 6 bar | 7 bar |
| Dimensions | ||
| Width | 830 mm | 830 mm |
| Length | 630 mm | 630 mm |
| Height | 1150 mm | 1150 mm |
| Weight with Stand | 150 kg | 150 kg |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks