Information needed to evaluate this model
When evaluating XE-TECH16/20 Multicolour Pad Printing Machine, prepare the artwork at actual print size and a sample with the production substrate. Assess colour separations, product holding and loading time together when deciding the machine configuration.
Compare technical data
The values below are the recorded specifications for this model. If the table contains several model columns, identify the selected column separately in your quotation or sample file.
| Printing Specifications | XE-TECH16/20 5C | XE-TECH16/20 6C | |||
|---|---|---|---|---|---|
| Number of Colours | 5 Colour | 6 Colour | |||
| Cliché Size | 275×580 mm (1) | 220×440 mm (2) | 180×360 mm (2) | 220×440 mm (2) | 180×360 mm (4) |
| Closed Ink Cup Diameter | ø250 mm | ø200 mm | ø160 mm | ø200 mm | ø160 mm |
| Maximum Printing Area | ø235 mm | ø185 mm | ø145 mm | ø185 mm | ø145 mm |
| Y-Axis Printing Travel | – | – | – | – | |
| Z-Axis Printing Travel | 200 mm | 201 mm | 202 mm | 200 mm | |
| Maximum Printing Pressure | 1700 N | 1701 N | 1702 N | 1700 N | |
| Supply and Control | |||||
| Control | Brushless Motor – Ball Screw | Brushless Motor – Ball Screw | Brushless Motor – Ball Screw | Brushless Motor – Ball Screw | Brushless Motor – Ball Screw |
| Electrical Supply | 380 Volt | 381 Volt | 382 Volt | 383 Volt | 384 Volt |
| Pneumatic Supply | 6 Bar | 7 Bar | 8 Bar | 9 Bar | 10 Bar |
| Dimensions | |||||
| Width | 2000 mm | 2000 mm | |||
| Length | 2400 mm | 2400 mm | |||
| Height | 2150 mm | 2150 mm | |||
| Weight | ± 1600 kg | ± 1600 kg |
How the colour configuration affects the job
This record shows a multicolour configuration. Match the artwork colour separations to the model configuration and define each colour’s position on the product using common references. For multicolour jobs, record colour registration and cycle steps as well as the colour count.
Include other component selections in the file
Fixtures, silicone pads, clichés and inks form a complete application setup. The model table alone does not confirm suitability for every part; prepare a test print on the actual product. Show surface pretreatment and post-printing steps separately in the workflow.
Compare quotations under the same conditions
- Identical product sample and artwork at final print size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print inspection