What should you check when evaluating this model?
Prepare your artwork at its actual print size and provide a sample with the surface used in production. Consider colour separations, how the product is held, and loading time together when choosing the machine configuration.
Compare the technical data
The values below are the specifications recorded for this model. When a table contains multiple model columns, identify the exact model selected in your sample or quotation request.
| Printing Specifications | EAZY 160 – 1C (One Colour) | EAZY 160 – 2C RR (Two Colours) |
|---|---|---|
| Number of Colours | 1 Colour | 2 Colours |
| Cliché Size | 180 × 360 mm | 150 × 300 mm |
| Closed Ink Cup Diameter | Ø 160 mm | Ø 130 mm |
| Maximum Printing Area | Ø 145 mm | Ø 115 mm |
| Pad Carrier Cylinder Stroke | 300 mm (*) | 300 mm (*) |
| Printing Cylinder Stroke | 100 mm | 100 mm |
| Two-colour RR Cylinder Stroke | – | 160 mm |
| Maximum Printing Pressure | 1680 N | 1680 N |
| Printing Speed (per hour) | 800 pcs / hour | 600 pcs / hour |
| Supply and Control | ||
| Control System | Electropneumatic | Electropneumatic |
| Electrical Supply | 110 / 220 V | 110 / 220 V |
| Pneumatic Supply | 6 bar | 6 bar |
| Dimensions and Weight | ||
| Width × Length × Height | 410 × 1025 × 680 mm | 755 × 1025 × 680 mm |
| Weight without Stand | 95 kg | 115 kg |
How the colour configuration affects production
This page covers the 1-colour configuration. Match the artwork separations to the machine configuration and define each colour’s position on the product using common reference points. For multicolour work, document registration and cycle steps as well as the number of colours.
Other options in the same series
Models within the EAZY160 series may differ in colour configuration and application. Compare the full model name and the measurements in each technical table.
Include the other components in your project file
Fixtures, silicone printing pads, clichés and inks form one application setup. Test the actual product before confirming compatibility from a machine specification alone. Record any surface pretreatment or post-printing steps in your production plan.
Compare quotations on the same basis
- The same product sample and artwork at final size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print checks