What should you check when evaluating this model?
Prepare your artwork at its actual print size and provide a sample with the surface used in production. Consider colour separations, how the product is held, and loading time together when choosing the machine configuration.
Compare the technical data
The values below are the specifications recorded for this model. When a table contains multiple model columns, identify the exact model selected in your sample or quotation request.
| Printing Specifications | EAZY 130 – 1C (One Colour) | EAZY 130 – 2C RR (Two Colours) |
|---|---|---|
| Number of Colours | 1 Colour | 2 Colours |
| Cliché Size | 150 × 300 mm | 120 × 250 mm |
| Closed Ink Cup Diameter | Ø 130 mm | Ø 110 mm |
| Maximum Printing Area | Ø 115 mm | Ø 95 mm |
| Pad Carrier Cylinder Stroke | 200 mm (*) | 200 mm (*) |
| Printing Cylinder Stroke | 80 mm | 80 mm |
| Two-colour RR Cylinder Stroke | – | 125 mm |
| Maximum Printing Pressure | 1060 N | 1060 N |
| Printing Speed (per hour) | 1000 pcs / hour | 700 pcs / hour |
| Supply and Control | ||
| Control System | Electropneumatic | Electropneumatic |
| Electrical Supply | 110 / 220 V | 110 / 220 V |
| Pneumatic Supply | 6 bar | 6 bar |
| Dimensions and Weight | ||
| Width × Length × Height | 410 × 850 × 660 mm | 520 × 850 × 660 mm |
| Weight without Stand | 76 kg | 89 kg |
How the colour configuration affects production
This page covers the 1-colour configuration. Match the artwork separations to the machine configuration and define each colour’s position on the product using common reference points. For multicolour work, document registration and cycle steps as well as the number of colours.
Other options in the same series
Models within the EAZY130 series may differ in colour configuration and application. Compare the full model name and the measurements in each technical table.
Include the other components in your project file
Fixtures, silicone printing pads, clichés and inks form one application setup. Test the actual product before confirming compatibility from a machine specification alone. Record any surface pretreatment or post-printing steps in your production plan.
Compare quotations on the same basis
- The same product sample and artwork at final size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print checks