Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| PRINTING SPECIFICATIONS | KP05 1C | KP05 2C RR |
|---|---|---|
| Number of Colours | 1 Colour | 2 Colour |
| Cliché Size | 100 × 200 mm | 80 × 200 mm |
| Closed Ink Cup Diameter | Ø 90 mm | Ø 70 mm |
| Maximum Printing Area | Ø 75 mm | Ø 55 mm |
| Pad Carrier Cylinder Stroke | 160 mm (*) | 160 mm (*) |
| Printing Cylinder Stroke | 100 mm | 100 mm |
| Two-colour RR Cylinder Stroke | – | 125 mm |
| Maximum Printing Pressure | 680 N | 680 N |
| Printing Speed / Hour | 1250 pcs | 800 pcs |
| SUPPLY AND CONTROL | ||
| Control Type | Electropneumatic | Electropneumatic |
| Electrical Supply | 110 / 220 V | 110 / 220 V |
| Pneumatic Supply | 6 bar | 6 bar |
| DIMENSIONS AND WEIGHT | ||
| Width × Length × Height | 335 × 580 × 690 mm | 435 × 580 × 690 mm |
| Weight without Stand | 44 kg | 58 kg |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks