Evaluating this model
Prepare the artwork at its actual print size and provide a sample of the production surface. Consider colour separations, product fixturing and cycle steps when selecting the machine.
Technical specifications
The values below are recorded for the model shown. Check each column separately if the table compares more than one configuration.
| Printing Specifications | KP13 1C | KP13 4C/5C | KP13 4C/5C Independent Pad | KP13 1C SLIDING |
|---|---|---|---|---|
| Number of Colours | 1 Colour | 4/5 Colour | 4/5 Colour | 1 Colour |
| Cliché Size | 150×300 mm | 150×300 mm | 150×300 mm | 150×550 mm |
| Closed Ink Cup Diameter | ø130 mm | ø130 mm | ø90 mm | ø130 mm |
| Maximum Printing Area | ø115 mm | ø115 mm | ø115 mm | 115 mm x 300 mm |
| Pad Carrier Cylinder Stroke | 320 mm | 320 mm | 320 mm | 320 mm |
| Printing Cylinder Stroke | 100 mm | 100 mm | XXX mm | 100 mm |
| Two-colour RR Cylinder Stroke | – | – | – | – |
| Maximum Printing Pressure | 4700 N | 4700 N | 4700 N | 4700 N |
| Supply and Control | ||||
| Control | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic |
| Electrical Supply | 380 V / 220 V | 381 V / 220 V | 382 V / 220 V | 383 V / 220 V |
| Pneumatic Supply | 6 bar | 7 bar | 8 bar | 9 bar |
| Dimensions | ||||
| Width | 1600 mm* | 2060 mm* | 2060 mm* | 1600 mm* |
| Length | 1536 mm* | 1536 mm | 1536 mm | 1536 mm |
| Height | 1937 mm* | 1937 mm* | 1937 mm* | 1937 mm* |
| Weight with Stand | ± 900 kg* | ± 900 kg* | ± 900 kg* | ± 900 kg* |
Compare configurations
Check the number of colours, cliché and ink cup dimensions, print area and production speed together. Validate the setup on the actual product before confirming suitability.
Include other components in the sample file
Fixtures, silicone printing pads, clichés and inks form one application setup. Record any surface pretreatment and post-printing steps separately.
Prepare comparable quotations
- Identical product sample and artwork at final size
- Colour count and colour references
- Daily production volume and loading steps
- Product material, coating and print quality checks