Information needed to evaluate this model
When evaluating MR100 1-Colour Pad Printing Machine, prepare the artwork at actual print size and a sample with the production substrate. Assess colour separations, product holding and loading time together when deciding the machine configuration.
Compare technical data
The values below are the recorded specifications for this model. If the table contains several model columns, identify the selected column separately in your quotation or sample file.
| Printing Specifications | MR50 | MR100 |
|---|---|---|
| Number of Colours | 1 Colour | 1 Colour |
| Cliché Diameter | ø100 mm | ø100 mm |
| Cliché Height | 50 mm | 100 mm |
| Pad Diameter | ø100 mm | ø200 mm |
| Maximum Print Diameter | ø100 mm | ø100 mm |
| Maximum Print Height | 30 mm | 80 mm |
| Prints per Hour – Manual | 1000 units | 1000 units |
| Prints per Hour – Automatic | 8000 units | 8000 units |
| Supply and Control | ||
| Control | Electropneumatic | Electropneumatic |
| Electrical Supply | 220 Volt | 221 Volt |
| Pneumatic Supply | 6 Bar | 7 Bar |
| Dimensions | ||
| Width | 830 mm | 830 mm |
| Length | 630 mm | 630 mm |
| Height | 1150 mm | 1150 mm |
| Weight Including Stand | 150 kg | 150 kg |
How the colour configuration affects the job
This record shows a 1-colour configuration. Match the artwork colour separations to the model configuration and define each colour’s position on the product using common references. For multicolour jobs, record colour registration and cycle steps as well as the colour count.
Include other component selections in the file
Fixtures, silicone pads, clichés and inks form a complete application setup. The model table alone does not confirm suitability for every part; prepare a test print on the actual product. Show surface pretreatment and post-printing steps separately in the workflow.
Compare quotations under the same conditions
- Identical product sample and artwork at final print size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print inspection