Information needed to evaluate this model
When evaluating XE30 Multicolour Sliding Pad Printing Machine – Extended Model, prepare the artwork at actual print size and a sample with the production substrate. Assess colour separations, product holding and loading time together when deciding the machine configuration.
Compare technical data
The values below are the recorded specifications for this model. If the table contains several model columns, identify the selected column separately in your quotation or sample file.
| Printing Specifications | XE30 4C | XE30 5C | XE30 6C Sliding | XE30 8C Sliding |
|---|---|---|---|---|
| Number of Colours | 4 Colour | 5 Colour | 6 Colour | 8 Colour |
| Cliché Size | 280×580 mm | 220×520 mm | 180×620 mm | 150×590 mm |
| Closed Ink Cup Diameter | ø250 mm | ø200 mm | ø160 mm | ø90 mm |
| Maximum Printing Area | ø230 mm | ø115 mm | 145 mm x 300 mm | 115 mm x 300 mm |
| Y-Axis Travel | 500 mm | 500 mm | 600 mm | 600 mm |
| Z-Axis Printing Travel | 150 mm | 150 mm | 150 mm | 150 mm |
| Maximum Printing Pressure | 25.000 N | 25.000 N | 25.000 N | 25.000 N |
| Supply and Control | ||||
| Control | Electropneumatic | Electropneumatic | Electropneumatic | Electropneumatic |
| Electrical Supply | 380 V | 380 V | 380 V | 380 V |
| Pneumatic Supply | 6 Bar | 6 Bar | 6 Bar | 6 Bar |
| Dimensions | ||||
| Width | 2050 mm* | 2050 mm* | 2050 mm* | 2050 mm* |
| Length | 1500 mm* | 1500 mm* | 1500 mm* | 1500 mm* |
| Height | 2040 mm* | 2040 mm* | 2040 mm* | 2040 mm* |
| Weight Including Stand | 2000 kg* | 2000 kg* | 2000 kg* | 2000 kg* |
How the colour configuration affects the job
This record shows a multicolour configuration. Match the artwork colour separations to the model configuration and define each colour’s position on the product using common references. For multicolour jobs, record colour registration and cycle steps as well as the colour count.
What options are available in the same series?
Models sharing a series name may have different colour configurations or applications. Use the full model name when comparing them and check each technical table’s dimensions separately.
Include other component selections in the file
Fixtures, silicone pads, clichés and inks form a complete application setup. The model table alone does not confirm suitability for every part; prepare a test print on the actual product. Show surface pretreatment and post-printing steps separately in the workflow.
Compare quotations under the same conditions
- Identical product sample and artwork at final print size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print inspection