Information needed to evaluate this model
When evaluating EAZY130 1-Colour Textile Printing Machine, prepare the artwork at actual print size and a sample with the production substrate. Assess colour separations, product holding and loading time together when deciding the machine configuration.
Compare technical data
The values below are the recorded specifications for this model. If the table contains several model columns, identify the selected column separately in your quotation or sample file.
| Printing Specifications | 1C |
|---|---|
| Number of Colours | 1 Colour |
| Cliché Size | 150×300 mm |
| Closed Ink Cup Diameter | 130 mm |
| Maximum Printing Area | ø115 mm |
| Pad Carrier Cylinder Stroke | 200 mm (*) |
| Printing Cylinder Stroke | 80 mm |
| Two-Colour RR Cylinder Stroke | – |
| Maximum Printing Pressure | 1060 N |
| Prints per Hour | 1000 units |
| Supply and Control | |
| Control | Electropneumatic |
| Electrical Supply | 110/220 Volt |
| Pneumatic Supply | 6 Bar |
| Dimensions | |
| Width | 410 mm |
| Length | 850 mm |
| Height | 660 mm |
| Weight Excluding Stand | 76 kg |
How the colour configuration affects the job
This record shows a 1-colour configuration. Match the artwork colour separations to the model configuration and define each colour’s position on the product using common references. For multicolour jobs, record colour registration and cycle steps as well as the colour count.
What options are available in the same series?
Models sharing a series name may have different colour configurations or applications. Use the full model name when comparing them and check each technical table’s dimensions separately.
Additional checks for textile samples
Include fabric composition, stretch and print position on the garment in the sample file. Check legibility separately for size information, care symbols and logos. Define the intended care and use conditions before approving the sample.
Compare quotations under the same conditions
- Identical product sample and artwork at final print size
- Number of colours and colour references
- Daily volume target and product loading and unloading steps
- Product material, coating and required print inspection